passes memtest at 1T settings 2.45ghz with no errors but I get data corruption and read errors when trying to load windows OS to the drive; due to the 1T Command per clock and low voltages.. Usually it's bsod before file copy can complete.. I increased some ram latency and disabled cpc... Made some progress at 200fsb 200 dram 1:1 4x htt 11x multi CPU at 2.2ghz; lota auto dram settings.. Voltage going to the CPU/chipset put it at 1.4v and 1.6v,
htt volts at 1.2; dram at 2.5-2.6
I'm making some progress; no more blank screens, I was able to start the windows installation and got to the point where it says "this portion of windows setup is finished, to continue setting up windows you must restart your computer" or something like that, when it restarts; I get "error loading opperating system"
I'm guessing I need to try again after reformating the drive/go with ntfs and full format, but what else could cause this?
