I got memory settings and cpu voltages set; ran memtest for a little while with zero errors. Ran into another issue: When I inserted xp install disc; as soon as I get to the booting from CDROM message, the screen goes blank and the monitor light turns orange.
I used the following settings:
FSB Bus Frequency............................. 200 MHz
CPu FSB Ratio: 11x
LDT/FSB 4.0x
CPU startup:1.30v
CPU VId control: 1.20v
CPU VID Special: Auto
LDT Voltage: 1.3v
Chipset Voltage: 1.5v
DRAM Voltage: 2.6v
DRAM Frequency: 200 fsb 1:1
CPC: Enable
TCL: 2.5
TRCD: 3
TRAS: 5
TRP: 3
TRC: 10
TRFC: 16
TRRD: 2
TWR: 3
TWTR: 2
TRWT: 3
TREF: 3072
Odd Divisor Correct: Disable
DRAM Bank Interleave: Enable
DQS Skew Control: Auto
DQS Skew Value: 0
DRAM Drive Strength: 7
DRAM Data Drive Strength: Level 2
Max Async Latency: 8.0 ns
DRAM Rewsponse Time: Normal
Read Preamble: 6.0 ns
Idle Cycle Limit: 256 cycles
Dynamic Counter: Disabled
R/W Queus Bypass: 16x
Bypass Max: 7x
32 Byte Granularity: Disable
