Need help with overlocking

[ousa]

Alright !!! Settings on my system currently (Y = YES/ENABLED AND N = NO/DISABLED)

dram timing control - cas latency (default spd) set to 3.

agp fast write enabled

H/W Monitor:-

sys temp - 43*c/109*f
cpu temp - 59*c/143*f
cpu fan speed - 3629 rpms
sys fan speed - 0 rpms (Y IS IT 0?)
VCORE - 1.612 V
+12.0V - 11.969V - 12.03V
-12.0V - -11.828V
+5.0V - 5.109V
BATTERY - 3.018V

CellMenu:-

Cool 'n' quiet - n
spread spectrum - n
cpu ratio - 10x
dynamic overlocking - n
cpu FSB clock - 240 MHZ
dram clock mode - Manual
dram clock - ddr 333 (as u suggested)
agp voltage Adjust(v) - Default Auto (Set to 1.70)(1.55 to 1.85 max values available)(ON Yellow=HIGH PERFORMANCE)(RED = RISKY)
dram voltage adjust(v) - Default 2.60 (Set to 2.70)(2.55 to 2.85 max values available)(ON YELLOW=HIGH PERFORMANCE)(RED = RISKY)

SYSTEM NOW = AMD 64 ATHLON 3200+ @2.4 GHZ AFTER OVERLOCKING (20% OVERLOCKED,240 X 10 AS U SAID)DRAM CHANGED TO DDR 333 INSTEAD OF 400.WHY? CANT WE USE 400?

THIS IS IT.
BEFORE I PUT THE VOLTAGE TO STOCK AND MY SYSTEM DIDNT BOOT PROPERLY,IT GAVE AN ERROR AND RESTARTED.THE CAS LATENCY WAS SPD B4.

AFTER THIS I CHANGED THE CAS LATENCY TO 3 AND DRAM VOLTAGE AND AGP VOLTAGE TO 1.70 AND 2.70 RESPECTIVELY.THEN EVERYTHING WORKED AND ITS STABLE.EVEN I TRIED PLAYING UT04 FOR HALF HOUR ONLINE WITH MAXIMUM PLAYERS BUT IS ALWAYS STABLE.

[ousa]

Field Value
CPU Properties
CPU Type AMD Athlon 64 3400+
CPU Alias Newcastle S754
CPU Stepping DH-CG
CPUID CPU Name AMD Athlon(tm) 64 Processor 3200+
CPUID Revision 00000FC0h

CPU Speed
CPU Clock 2400.43 MHz
CPU Multiplier 10.0x
CPU FSB 240.04 MHz (original: 200 MHz, overclock: 20%)
Memory Bus 200.04 MHz

CPU Cache
L1 Code Cache 64 KB (Parity)
L1 Data Cache 64 KB (ECC)
L2 Cache 512 KB (On-Die, ECC, Full-Speed)

Motherboard Properties
Motherboard ID 63-1013-009999-00101111-040201-VIA_K8$1XXXX000_A7032VMS V3.3 101304
Motherboard Name MSI K8M Neo-V (MS-7032) (5 PCI, 1 AGP, 2 DDR DIMM, Audio, Video, LAN)

Chipset Properties
Motherboard Chipset VIA VT8380 K8M800, AMD Hammer
Memory Timings 3-3-3-7 (CL-RCD-RP-RAS)
Command Rate (CR) 1T

SPD Memory Modules
DIMM1: 512UFURTSNAB 512 MB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)
DIMM2: 1 GB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz)

BIOS Properties
System BIOS Date 10/13/04
Video BIOS Date 01/10/05
DMI BIOS Version Version 07.00T

Graphics Processor Properties
Video Adapter nVIDIA GeForce FX 5200
GPU Code Name NV34 (AGP 8x 10DE / 0322, Rev A1)
GPU Clock 250 MHz
Memory Clock 182 MHz