Results 1 to 2 of 2

Thread: Re: No start up?

  1. #1
    Kadaitcha Man Guest

    Re: No start up?

    PeeCee <abuse@local.host>, the cheeseparing cofferer, disgorged:

    > <l6l2h2auctions@yahoo.ca> wrote in message
    > news:1160474107.135755.279040@e3g2000cwe.googlegro ups.com...
    >> P4 with WinXP updated, virus checked etc...
    >> Try to turn on computer, will not boot. Power light and hard drive
    >> lights come on and stay on. Fans in power supply and on processor
    >> running. Can't hear hard drive. Swapped in another power supply, no
    >> luck. Tried booting while holding <Delete>, no luck.
    >> Is this typically a hard drive problem or could it be a communication
    >> problem between the MB and HD? Any troubleshooting tips?
    >>
    >> TIA, Brian
    >>

    >
    > Brian
    >
    > Unplug the AC mains lead.
    > Remove all connected devices from the motherboard except CPU, RAM &
    > Graphics adapter.
    > i.e disconnect modem, hard and floppy disk drives, CD / DVD drives,
    > USB devices etc
    > Check those remaining devices are properly seated and motherboard
    > mounting screws are snug.
    > (I usually dismount and reinsert RAM/Graphics/CPU in their sockets to
    > make sure, note your Graphics may be on the motherboard, as such it
    > will not be demountable)
    >
    > Reconnect the AC, Start the PC:
    >
    > 'If' the PC boots (it will only boot to a black and white screen and
    > complain about no boot device but that's fine, it proves these bits
    > in the PC are working and booting to that stage anyway)


    BWAHAHAHAHAHAHAHAHAHA! LMFARO at you. You utterly ****witted ****.

    And apart from that, ****flap, what exactly does the OP mean by "processor
    running", hmmm? Did you make the ****witted assumption that he's getting a
    BIOS boot screen?

    > add
    > components one by one till you find the culprit, eg a fried Modem can
    > sometimes stop a PC booting.
    > 'On the other hand' if it still does not boot the suggested option is
    > to try the RAM/CPU/Graphics card in another PC that uses the same
    > components till you determine the culprit.
    > Obviously if they all work then the likely hood is the motherboard is
    > toast.
    > One motherboard fault that is easy to detect by visual means is to
    > check the tops of the Capacitors on the motherboard (Black, Green
    > cylindrical components with a silver top) If the silver top is
    > bulging and not dead flat and / or shows signs of a brown goo leaking
    > out then the capacitors are U/S. This page has details of this
    > particular problem http://en.wikipedia.org/wiki/Capacitor_plague
    >
    >
    > Cheers
    > Paul.




    --
    alt.usenet.kooks - Pierre Salinger Memorial Hook, Line & Sinker:
    September 2005 and April 2006

    "K-Man's particular genius, however, lies not merely in his humour,
    but his ability to make posters who had previously seemed reasonably
    well-balanced turn into foaming, frothing, death threat-uttering
    maniacs" - Snarky, Demon Lord of Confusion

    Thou beetle-head. Thou hog sucker.

  2. #2
    Brian Guest

    Re: No start up?

    * Kadaitcha Man:

    > And apart from that, ****flap, what exactly does the OP mean by "processor
    > running", hmmm? Did you make the ****witted assumption that he's getting a
    > BIOS boot screen?
    >


    Wow man, take your meds. The OP said "Fans in power supply and on
    processor running." He was talking about the fans NOT the processor.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •