The WRT-54gL is not just for linux based systems. The L simply designates it as a router that runs/is compatible with a linux based firmware. Linksys was forced to release their firmware source to the public several years ago because it was based on linux which is GPL'd. They didn't like this one bit so about 18 months ago they switched to a proprietary os for their firmware. The benefit of the L version is that you can take advantage of the huge open source firmware development community that has improved upon the router's firmware.
DD-WRT
OpenWRT
HyperWRT
Tomato
The routers firmware is basically a mini operating system. Linksys used to use linux, now they use VxWorks. It goes without saying that the routers that used linux were much more versatile.
If this doesn't interest you, don't pay more for the L version. I've had good luck with Buffalo WHR-HP-54G's as well. They are inexpensive and have a signal amplifier to boost Tx power (it doesn't boost receive sensitivity though, so it's only marginally useful). The WHR-HP-54G, WRT-54GL, Asus 500G (and P) as well as several other routers all use broadcom chips and are compatible with many opensource firmware projects.
Probably more than you wanted to know. Basically the WRT-54GL is a good router and Linksys recognized the power of the firmware modding community so it keeps it in production, but in smaller numbers and at higher prices.
I should also mention that I don't buy a router unless it's able to be flashed with DD-WRT. I currently use an Asus WL500P, but have several older wrt-54gs's and 2 Buffalo whr-hp-54g routers for long range wireless connections (flashed to dd-wrt and placed in client mode). Several with larger than normal 8 dBi gain antenna's
Last edited by acruxksa; 08-20-2007 at 07:02 PM.
2 x Xeon e5520 | Asus Z8NA-D6C
12 GB G.Skill DDR3 | Radeon 5850
Corsair 128GB SSD | WD Black 1TB HDD